Doctor Collector

Roommate, best friend, Goddess of the Hunt: Artemis wears many hats, and she wears them all with unshakable confidence. It was Artemis who pried Persephone from the velvet vice grip of Demeter's overprotectiveness and offered her a home in Olympus. A new life with just a few ground rules (no men in the house, for starters). Tough, loyal, and always two steps ahead, Artemis is both sword and shield, determined to see her friend flourish... preferably without a scandal.
"Artemis arrives in collectible form with all the poise and presence fans have come to love. Brought to life by our expert artisans, this figure captures the confidence and clarity of Olympus' resident huntress.
Every sculpted detail speaks to Artemis' layered spirit, from the determined set of her jaw to the strength in her stance. Fierce and protective, with a heart as big as her opinions, she's the roommate who bakes you an apology cake and the guardian who'll roast your enemies without blinking.
Rendered straight from the pages of Rachel Smythe's Lore Olympus and into glorious 3D, this collectible is for those who know that strength doesn't mean softness is out of reach, and that a little snark never hurts.

- Features Artemis, clad in her classic attire;
- Expert techniques in both sculpting and paint application bring the iconic style of Lore Olympus to life;
- Made in collaboration with Lore Olympus creator, Rachel Smythe;
- Digitally sculpted by Weta Workshop 3D artist Daniel Holland.

Regal, radiant, and razor-sharp, Hera commands every room she enters, whether with a smirk or a storm. To those she loves, she is a sanctuary; to those who cross her, a reckoning. Beneath the pearls and poise lies a heart weathered by betrayal, still beating fiercely for justice, loyalty, and the dream of what could have been. She is queen, confidante, and cautionary tale, all at once (and heaven help the fool who forgets it).
"Few command attention like Hera, and our artists have ensured she does exactly that, even in collectible form. This figure captures the full force of Olympus' most formidable queen.
Hera has been lovingly sculpted in three dimensions; an elegant fusion of regality and vulnerability, just as she appears in Rachel Smythe's Lore Olympus. A portrait of strength, sorrow, and the smouldering fire of a goddess who refuses to be forgotten.
Whether you adore her for her sharp tongue, her softer side, or the drama she carries like fine perfume, Hera is a must-have: a divine addition worthy of centre stage.

- Features Hera, clad in her classic attire;
- Expert techniques in both sculpting and paint application bring the iconic style of Lore Olympus to life;
- Made in collaboration with Lore Olympus creator, Rachel Smythe;
- Digitally sculpted by Weta Workshop 3D artist Daniel Holland.

Upon the blood-soaked Pelennor Fields™, the Witch-king strode, a shadow of death reaping lives with blade and flail. Neither the fall of his fell steed nor the desperate struggles of men could halt his grim purpose. Towering above the insignificant warrior, his unseen gaze cast down upon his prey, despair was all that could remain.

Step into the world of Middle-earth with our latest Miniature Statue: The Witch-king. Every sinister detail of his terrifying form has been meticulously crafted, from the jagged edges of his iron crown to the intricate links of his spiked flail, captured mid-swing.
Inspired by the iconic scene from the Battle of the Pelennor Fields, where the imposing figure of the Witch-king, having lost his mount, bears down upon the disguised Éowyn™-our artists have poured their passion into recreating this menacing moment. Every texture within his dark robes and minute detail of his weaponry is a testament to their artistry and love for Middle-earth.

This piece is a must-have-a chance to own a tangible fragment of one of the most iconic scenes in cinematic history. Don't let the Witch-King's wrath slip into shadow. Add this masterpiece to your collection and let it stand as a dark reminder of the Witch-king's wrath."
- Made primarily from polystone;
- Depicts The Witch-king in a dynamic mid-battle pose as seen in The Return of the King;
- Digitally sculpted by Middle-earth veteran Gary Hunt.

Upon the snowbound Path of Caradhras™, beneath a sky heavy with storm's whisper, Boromir beheld the One Ring™. Cold and bright it swayed within his grasp, its silver chain curling like a serpent's coil. A fire unseen burned within its depths, and though no voice was heard, a call slithered into his heart, sweet with promise and laden with power. His breath wavered; his hand trembled. For a moment, the will of a mighty man waged war against the seduction of shadow.
In the heart of Middle-earth's legend lies a moment of quiet peril-Boromir, son of Gondor™, standing upon frigid peaks, the One Ring dangling from his fingers. The weight of duty, the lure of power, the flicker of doubt behind steadfast eyes-our artists have captured it all in breathtaking detail.
Every fold of his fur-lined cloak, every strain of contemplation upon his brow, every subtle glint of gold in the Ring's cruel form-this statue is more than a mere depiction. It is a study of a noble warrior's struggle, wrought with reverence and precision. From the sculptor's hand to your collection, this is Boromir as you have never seen him before, frozen in the moment that foreshadowed his tragic end.
A collector does not merely gather objects; they safeguard the stories that shape legend. Let Boromir's trial stand among your treasures-a reminder that even the strongest hearts may falter, and that true courage is found in the choices we make.

- 1:6 scale;
- Made primarily from polystone;
- Chain and One Ring made from metal;
- Immaculately detailed with unique references to the on-screen props and costume;
- Depicts Boromir in his moment of internal struggle as seen in The Fellowship of the Ring;
- Digitally sculpted with expert precision by Weta Workshop artisan Jason Zhang.

Beneath his tattered robes and fungal finery, Skragrott's power seethes like a cursed elixir. His gaze turned ever skyward, yearning for the cold, unfathomable twilight of the Bad Moon that spoke to him once before. That fateful communion left him more than a prophet-it left him a king, feared and reviled by Gitz and enemies alike. Yet, the Loonking is not content. Obsession consumes him, a relentless hunger that gnaws at his very core. He will tear the realms asunder, crushing all who dare stand in his way. Nothing will stop him from hearing the Bad Moon's dark whispers once more. Nothing.
Crafted with masterful precision and an unwavering dedication to detail, this premium collectible statue brings to life the twisted majesty of Skragrott the Loonking, from Warhammer Age of Sigmar.
Every inch of this masterpiece captures the essence of his dark power-his staff, adorned with twisted mushrooms and ritualistic fetishes, stretches high into the air, while his regal yet malevolent presence demands attention. The intricate textures, from the sculpted fungi to the jagged crown, showcase the exceptional artistry of our artisans, particularly that of Daniel Cockersell, who traditionally hand-sculpted this stunning piece physically out of clay.
The dynamic pose and lifelike features reveal the deep attention to the character's essence-his malice, cunning, and unyielding ambition are palpable. Whilst hidden within the fungal base, a pair of hungry and mischievous squigs gnaw and gnash without restraint.
Whether displayed in your collection or admired as a work of art, this statue stands as a testament to the craft of transforming the fantastical into the tangible.

- Limited Edition of 700;
- 1:6 scale;
- Made primarily from polystone;
- Physically hand-sculpted by Weta Workshop artisan, Daniel Cockersell;
- Dynamic pose portrays Skragrott in his element, commanding the dark forces of the Gitz;
- Equipped with relics of the Bad Moon-his Moon Onna Stick, skull-topped wand, and fungal crown.
- Accompanied by a pair of playful yet mischievous squigs;
- Set amongst Skragrott's spore-ridden lurklair.

Dimensions: 27,5 x 41 x 47 cm

Important NOTE:
Due to the anticipated size of the item, additional shipping costs may apply. These costs will depend on the shipping address, product dimensions and product weight. These details are not yet known and may only be determined once the goods arrive at our warehouse.

"S.T.A.R.S!"

PureArts masterfully crafts the imposing and horrifying bio-weapon from Resident Evil 3, Nemesis, in a massive 1/1 scale bust. His half-exposed face, decaying, stitched skin, protruding teeth, and mechanical tubing are carefully sculpted and painted to create an impressively terrifying bust. Nemesis is mounted atop a concrete-style base bearing the Umbrella Corporation logo, referencing the sinister organization responsible for his creation. Towering at 3 feet tall, you will feel the danger Nemesis brings.

Product Size: 92 cm

Limited Edition of 150 pcs worldwide.

Important NOTE:
Due to the anticipated size of the item, additional shipping costs may apply. These costs will depend on the shipping address, product dimensions and product weight. These details are not yet known and may only be determined once the goods arrive at our warehouse.

From Kotobukiya's sci-fi fantasy plastic model kit series, ARCANADEA, the Dears with a devilish form, Ornela, joins the lineup! The model is based on an original illustration by whoopin, an up-and-coming illustrator active in a wide range of fields including illustrations for anime and video games. By changing out certain parts, the model can be assembled in Normal Mode or Wilize Mode for combat. The model is equipped with several 3mm joints, making it compatible with parts from other Kotobukiya original series. This is the first Dears in the series to alternate between a True Form and a Disguised Form! Changing forms greatly alters the character's presence and impression.

Included Items and Features:
- The model can be assembled in Normal Mode or in the combat-ready Wilize Mode by changing out certain parts.
- The kit includes four types of face parts that have been pre-printed with tampography.
- In addition to the pre-printed face parts, four optional face parts without horns that are compatible with the ARCANADEA series are included. (The optional face parts are not pre-printed with tampography.)
- Decals are included for users to create their preferred expressions.
- The kit includes neck parts for attaching heads from the Frame Arms Girl and Megami Device series.
- A special stand is included.
- The kit includes six sets of PVC hand parts.
- The knee joints are newly designed. In addition to the pop-out joints, the upper and lower joints are poseable.
- The base of the side bangs are articulated and can be posed to avoid contact with other parts.
- The front skirt is articulated with ball joints to allow for various poses.

Normal Mode:
- The fur shawl recreated from the illustration can be removed. Display the model in your preferred style.
- The sleeves are articulated with ball joints and allow for various poses.
- Includes a smoking pipe accessory which can be held in the hand with an attachment part.

Wilize Mode:
- The back of the hair can be moved with the joint connections.
- The double-joint design of the upper arm allows for various poses.
- Each section of the arm armor is articulated and can be adjusted with poses.
- The katana is able to be sheathed in and unsheathed from its scabbard.
- The weapon on the back can be separated and held in each hand. They can also be attached to the arm armor.
- By switching out the skirt, the design for Wilize Mode can be recreated.

Product Size: 19 cm

“Engaging with Master has got me super hyped!
…But if we engage, Master will only belong to Enil, okay?”

From Kotobukiya's sci-fi fantasy plastic model kit series, ARCANADEA, the twin Dears with a devilish form, Enil, joins the lineup!

The character design is by the highly anticipated and popular illustrator, Nidy-2D-!
Under the supervision of Nidy-2D-, the model has been brought to life with meticulous attention to detail, down to the color scheme and face design.

By changing out certain parts, the model can be assembled in Normal Mode or Wilize Mode for combat.
The model is equipped with several 3mm joints, making it compatible with parts from other Kotobukiya original series.
Featuring a large XenoAlma under her control, this kit is one of the largest in the series!

Included Items and Features:
- The model can be assembled in Normal Mode or in the combat-ready Wilize Mode by changing out certain parts.
- The kit includes four types of face parts that have been pre-printed with tampography.
- Decals are included for users to create their preferred expressions.
- The kit includes neck parts for attaching heads from the Frame Arms Girl and Megami Device series.
- A special stand is included.
- The kit includes 11 sets of PVC hand parts for the left and right sides.
- Magic circle optional parts to connect to the back unit are included.
- A large (dog-type) XenoAlma is included.

Normal Mode:
- Ball and joint articulation on the base of the two twin tails allows for various expressions.
- The parts are separated along the details of each part of the fabric so the seams are not visible.
- A double-joint structure in the elbows allows for a wide range of articulation while preserving the thick sleeve silhouette.
- The scarf and skirt can be removed.
- For the arms, the upper arm rings and sleeves each feature joint articulation. The direction of movement can be adjusted by rotating the joint at the base.
- A new design is utilized for the hip joints. In addition to the slide articulation of the hip joint, the implementation of front-to-back articulation allows for maximum extension. Furthermore, a wider range of articulation is achieved by pulling out the ball receiver on the thigh side.
- The front skirt is articulated to avoid hindering leg movement.
- The knees use pop-out joints for articulation.

Wilize Mode:
- In addition to the articulation of various joints on the large right arm, each finger on the hand is poseable.
- By reconfiguring some parts, it can also be assembled as a left arm.
- Includes parts to support posing the back wing after changing modes.
- The claws can be combined with the armor to wielded as a weapon.
- By combining with Banil, large arms can be connected to both sides.
- Each part uses universal joints, allowing for customization. The combined form can be freely reconfigured and customized.

XenoAlma:
- Free posing is possible through the articulation of various joints.
- Transforms and connects to the back as the right arm unit in Wilize Mode.
- The tail can be wielded as a weapon by equipping it the wrist of the main body.
- The mouth can open and close, making it possible to hold the tail sword in the mouth.
- The hard points on each part can be used to freely customize the model.
- Can be combined with the XenoAlma included with Banil to change into a Cerberus form.
Product Size: 17 cm

Introducing Blaze Ophis from the XenoAlma Series — A weapon series that expands the lore and customizability of the Arcanadea series. The parts can be reassembled to create two forms: Monster form, which can be fully built with this kit alone, and the weaponry form for the character Lumitea. Blaze Ophis can also be combined with Flame Straile to create the giant XenoAlma, Explode Volcalion. Each part is connected via 3mm joints, allowing them to be used not only with Arcanadea characters but with all original Kotobukiya series models. Included Items & Features: - Parts can be reassembled to create two forms: Monster form, which can be fully built with this kit alone, and the weaponry form for the character Lumitea. - Blaze Ophis can be combined with Flame Straile to create the large XenoAlma, Explode Volcalion. - Blaze Ophis can be combined with Flame Straile to create a large back unit, Explode Wing. - Each part is articulated, allowing for a variety of poses in Monster form. - The 3mm connection points on each part make them customizable and compatible with existing M.S.G, Frame Arms, Frame Arms Girl, HEXA GEAR, SOUSAISHOJOTEIEN, and MEGALOMARIA parts. - The kit includes the standard Arcanadea base. Use the base to display Blaze Ophis floating in the air. Weaponry Mode: - Ear Guards: Left and right included. Can be connected to the head parts of Lumitea and Ermeda. Parts to convert them to 3mm joint are also included. - Back Unit: All parts are connected by 3mm joints, allowing for flexible movement. - Longbow: A longbow can be created by adding some parts to the back unit. - Bow Gun: 3mm joint connection allows connection with other Kotobukiya kits. The front and back cover parts also have 3mm connections, and can be detached or expanded. - Blade: 3mm joint connection allows connection with other Kotobukiya kits. The front and back cover parts also have 3mm connections, and can be detached or expanded. - Leg Armor: 3mm joint connections of the knee guards allow connection with other Kotobukiya kits. Can be connected to Frame Arms Girl and Megami Device using the included attachments.

*Some products may not be compatible due to shape restrictions.
Product Size: 26 cm

Introducing Flame Straile from the XenoAlma Series — A weapon series that expands the lore and customizability of the Arcanadea series. The parts can be reassembled to create two forms: Monster form, which can be fully built with this kit alone, and the weaponry form for the character Lumitea. Flame Straile can also be combined with Blaze Ophis to create the giant XenoAlma, Explode Volcalion. Each part is connected via 3mm joints, allowing them to be used not only with Arcanadea characters but with all original Kotobukiya series models. Included Items & Features: - Parts can be reassembled to create two forms: Monster form, which can be fully built with this kit alone, and the weaponry form for the character Lumitea. - Flame Straile can be combined with Blaze Ophis to create the large XenoAlma, Explode Volcalion. - Flame Straile can be combined with Blaze Ophis to create a large back unit, Explode Wing. - Each part is articulated, allowing for a variety of poses in Monster form. - The 3mm connection points on each part make them customizable and compatible with existing M.S.G, Frame Arms, Frame Arms Girl, HEXA GEAR, SOUSAISHOJOTEIEN, and MEGALOMARIA parts. - The kit includes the standard Arcanadea base. Use the base to display Flame Straile floating in the air. Weaponry Mode: - Shoulder Armor: Includes armor for both shoulders. 3mm joint connection allows connection with other Kotobukiya kits. The front and back cover parts also have 3mm connections, and can be detached or expanded. - Back Unit: The base, left, and right units are connected by 3mm joints, allowing for flexible movement. The flame effect parts also have 3mm connections, and can be detached or expanded. The effect part in the center of the back unit is articulated and feature a ball joint that allows for flexible movement. - Swords: Two curved swords can be created by adding parts to a part of the back unit.

*Some products may not be compatible due to shape restrictions.
Product Size: 10 cm

"From Kotobukiya's ""Sci-Fi Fantasy x Bishoujo"" plastic model series, ARCANADEA, the dragon-form Dears, Gii, joins the lineup!

The model is based on an original illustration by necömi, a popular illustrator known for her video game and VTuber character designs.
By changing out certain parts, the model can be assembled in ""Normal Mode"" or ""Wilize Mode"" when in combat.
The model is equipped with several 3mm joints, making it compatible with parts from other Kotobukiya original series.

Included Items and Features:

- The model can be assembled in ""Normal Mode"" or ""Wilize Mode"" by changing out certain parts.
- The kit includes five tampographed faces (Normal, Smiling, Starry Eyed, Crying, Angry). The angry face comes with two mouth parts that can be switched out to have a 3mm connection point.
- The kit includes left and right bent sleeve parts.
- The kit includes breath effect parts.
- The kit includes arm effect parts.
- The kit includes five interchangeable hair tuft parts.
- Decals are included to help users create their preferred expressions.
- The ears are interchangeable with the ears of other Dears.
- The kit includes neck parts for attaching heads from the Frame Arms Girl and Megami Device series.
- The kit includes a dedicated stand.
- The kit includes five sets of newly sculpted hand parts.

Normal Mode:

- The kit includes five different ahoge parts that are all articulated at the base and can move from side to side.
- The hair on either side of her face are articulated at the base, preventing interference when posing.
- The mouth of the angry face can be switched out for one with a 3mm connection point.
- The hip joints feature a new design that is more compact and allows for more movement than previous models with fewer parts.
- The tail is comprised of multiple connections and ball joints, allowing for highly flexible and expressive movement.
- The ball joints in the wrist allow the long sleeve parts to move up and down and from side to side.
- The 3mm connection points in the sleeves allow the frills to be freely removed and replaced with different parts.
- The kit includes alternate sleeve parts designed for deeper bends, prioritizing appearance over articulation.
- The magic circle base uses a pivot mechanism that prevents interference when posing.

Wilize Mode:

- The twin-tails are articulated at the base.
- The hem of her robe is articulated with ball joints, making it possible to prevent interference when posing.
- The main wing parts feature three points of articulation that allow for movement up to 95 degrees. The tips of the sub wings are also articulated.
- The bases of the wings are articulated, allowing them to open out wide.
- Each wing can also turn into massive claws by combining the points of articulation.
- The arms supporting the large wings are designed with stable 5mm connection joints. The various points of articulation allow the wings to spread and be posed in any direction.
- The flame arm effect parts feature articulation at the elbows. The hand flame parts are split into three sections with ball joints at the base that allow them to individually spread out.
- The large hand parts are connected with ball joints for expressive posing."

From the phenomenal anime "Demon Slayer: Kimetsu no Yaiba", a series of 1/6th scale collectible figures has debuted as part of threezero's FigZero line! The first figure is the protagonist, Tanjiro Kamado!
FigZero 1/6 Tanjiro Kamado is approximately 27.5 cm tall. It is a fully-articulated collectible figure with approximately 37 points of articulation. The materials used for the figure are mainly ABS, PVC, POM and fabric.

The figure's attire includes the fabric-made Demon Slayer Corps uniform, and Tanjiro's iconic haori with an interior metal wire for poseability

The figure comes with three interchangeable facial expressions (one smile face, one serious face and one gag face) and six sets of interchangeable hands. Additional accessories include a metal Nichirin Sword, a knife and a plastic-made wooden box. Furthermore, a breath effect part (with magnet inside) and water breathing effect part are included to showcase Tanjiro's dynamic swordsmanship.

Specifications:

FEATURES:

- 1/6th scale, approximately 27.5 cm tall
- Approximately 37 points of articulation

COSTUME:

- One (1) Demon Slayer Corps uniform made of fabric
- One (1) haori made of fabric
- One (1) pair of shin guards
- One (1) belt
- One (1) pair of zori
- One (1) pair of tabi socks

ACCESSORIES:

- Three (3) interchangeable faces: One (1) simile face, One (1) serious face (with magnet inside to attach breath effect piece), and one (1) gag face
- Six (6) sets of interchangeable hands: One (1) pair of fists, One (1) pair of relaxed hands, One (1) pair of open hands, one (1) pair of griping hand, one right shakehand grip hand and one (1) left holding sheath hand
- One (1) Nichirin Sword made of metal and its sheath
- One (1) knife
- One (1) openable wooden box made of plastic
- One (1) Water Breathing effect part for attaching to the Nichirin Sword
- One breath effect (with magnet inside) to attach to the serious face

Dark Horse, in partnership with Amazon MGM Studios, rolls back the Vault doors to reveal three new PVC figures from the acclaimed Fallout Series! Based on the hit video game series, Fallout is the story of haves and have-nots in a world in which there’s almost nothing left to have. For 200 years following a nuclear apocalypse, many humans have been forced to go underground in “Vaults” to seek refuge, while the less fortunate were left to survive the harshness of the wasteland above. Featuring three characters from the upcoming Prime Video series, Dark Horse presents an initial lineup of deluxe, hand-painted Fallout PVC figures of Lucy, Maximus, and The Ghoul.

A member of the Brotherhood of Steel, Maximus grew up in a cruel and inhospitable post-apocalyptic America. He seeks power as a means to shield himself against the violence of the world and his own insecurity. Wearing his battle-worn Power Armor, the Maximus Figure stands at an imposing 10” and includes an alternate headpiece so that fans can display Maximus with the Power Armor Helmet on or off!

From the animated film "Mobile Police Patlabor 2 the Movie", comes a MODEROID plastic model kit of the AV-98 Ingram Reactive Armor! The heads of Units 1, 2, and 3 that appeared in the movie are all included, and each machine can be created by pairing the head parts with included water-slide decals for creating the markings of each machine.

In addition to a normal state head for Unit 3, an ECM pod deployment state version for electronic warfare is also included. The head of Unit 1 comes with a cover part to protect the main camera. The cover can be displayed open or closed. A revolver cannon, stun sticks (long/short) and riot gun are all included.

In addition to the Reactive Armor version of the machine, this model kit includes parts to create the basic Ingram body that was operated as an experimental machine for data collection. Units 1-3 can also be created in their bare states by using the included chest parts with the rising sun emblem removed and the included shoulder parts without siren lights.

WXIII glove parts are also included as a bonus, and can be used with MODEROID AV-98 Ingram (sold separately) or the the head parts and Special Vehicle Section 2 emblem decal included with this product in order to create Unit 1 and 2's appearance from the third movie. Enjoy creating all kinds of variations of the Ingram with this high play-value plastic model kit!

*Either the Reactive Armor equipped Ingram or basic Ingram body can be created with this kit.
*the product is a combination of parts from MODEROID AV-98 Ingram and brand new parts. It is not possible to create the standard equipment AV-98 Ingram with this kit.