Pre-Orders

"They gave me the courage to travel and taught me the joy of spending time with friends."

From the anime series "Frieren: Beyond Journey's End" comes a scale figure of the mage Frieren. The rich world of the series is perfectly encapsulated in scale figure size.

Frieren has been faithfully captured in figure form with a solemn look on her face, gazing off into the ephemeral glow of the setting sun, as though reflecting on her journey so far, or yearning for someone most dear.

Not only Frieren herself, but her beloved trunk and staff too have been meticulously recreated in figure form. The realistic worn textures of her possessions convey the many years they've accompanied Frieren. The delicate design of the Mirrored Lotus Ring on her left hand has been carefully preserved as well.

Be sure to add her to your collection, and enjoy viewing each and every detail this figure has to offer.

"From Kotobukiya's new Sci-fi Fantasy series, ARCANADEA, the Dears with an animal-like form, Elena, joins the plastic model kit lineup! The model brings to life an original drawing by prolific anime, manga and video game illustrator, Z-ton. By changing out certain parts, the model can be assembled in "Normal Mode" or "Wilize Mode" when in combat. The model is equipped with 3mm connection joints, making it compatible with parts from other Kotobukiya original series. Included Items & Features: - The model can be assembled in ""Normal Mode"" or in the combat-ready ""Wilize Mode"" by changing out certain parts. - The kit includes four face parts that have been pre-printed with tampography. - Decals are included to help users create their preferred expressions. - The horse ears are removable, allowing for versions with and without ears. - A connection joint at the base of the ponytail provides movement. - The magic circle-shaped part on the back has a HEXA G-R.A.M joint with a 3mm connection point in the center. It is compatible with other magic circle-shaped parts in the ARCANADEA series. - There are three ball joint connections, one in the hip of the human body and two in the lower torso of the horse body, for flexible movement and freedom of posing. In addition to wielding weapons, the model can also pull off horse-like poses such as lying down and sitting. - 3mm hard points are installed on the back, lower torso, and above the tail of the horse body. - The decorations on the base and tip of the belt around the waist can move back and forward. - A connection joint in the base and ball joint in the middle of the belt provide movement on either side. - A connection joint at the base of the tail provides movement. - The left shoulder armor in Wilize Mode slides together to create a large shield. - The left shoulder armor parts can also be switched out to create an additional form. - The top and bottom of both sides of the waist armor in Wilize Mode have 3mm hard points and come with cover parts, allowing for a variety of customization. - Choose between two tip parts to enjoy different forms of the large lance. - As a feature unique to this kit, the weapons and lower body can be combined to create a silhouette akin to a war horse. - A special stand is included. - Pose-supporting attachment parts are included to connect the magic circle on the back and back of the lower body, allowing for unrestricted poses with the lance. - The kit includes five sets of PVC hand parts. - The 3mm connection joints on the model are compatible with parts from the M.S.G, Frame Arms, and Frame Arms Girl series. - The kit includes neck parts for attaching heads from the Frame Arms Girl and Megami Device series." 

Please note: For this item, demand is expected to be higher than the available quantity, which may result in allocations or cancellations of quantities ordered.

"The way you talk pisses me off!" "That is totally fine with me!" A blood boiling academy battle erupts at 1/4 scale. With its explosive battle scenes and meticulously crafted story, "KILL la KILL" has captivated passionate fans around the world. From this academy battle anime created by Hiroyuki Imaishi and Kazuki Nakashima comes "KILL la KILL Ryuko Matoi vs Satsuki Kiryuin," joining the Ultimate Premium Masterline. Satsuki leaps high into the air, delivering a powerful slash. Ryuko meets the blow with everything she has, searching for an opening to strike back. Inspired by the package visual of "KILL la KILL - IF," this statue captures the clash between two rivals. While staying true to the package illustration’s crisp diagonal composition, we add background elements and effects that evoke depth, bringing the scene to a dramatic finish. From the angle of their eyebrows to the finest facial details, each character’s expression faithfully reflects their on-screen presence. Kamui Junketsu is finished in a refined pearl coating, while Kamui Senketsu features deep blue tones accented with vivid crimson. The contrasting textures of Bakuzan and Ryuko’s Scissor Blade in Bucchigiri Mode are also carefully rendered. Every aspect of the sculpting and paintwork showcases a wide range of techniques made possible by the impressive 1/4 scale, resulting in a piece that reveals its precision from every angle. The specially designed base, with debris swirling upward, is inspired by Honnouji Academy. Cross Flash effects scattered throughout the composition faithfully translate the effect styling from the anime series into three dimensions. Rising behind the statues, a massive cross houses a built-in LED unit, its brilliant light enhancing the sense of immersion and presence. The Bonus Version includes an acrylic name block with a floating look. Rendered in the familiar extra bold font, it is a collector’s item that turns up the heat on your display even further. This high-definition 1/4 scale battle between Ryuko and Satsuki brings sculpting, paintwork, and lighting together in perfect harmony—everything about it is sure to set your blood boiling.

Product Specifications:
- KILL la KILL-Themed Base with LED Illumination
- Logo Acrylic Block [BONUS PART]

LED Power Supply Method: TBD
* Please prepare batteries, USB cables, or other necessary items depending on the final power supply method.


* Limited to 400 pieces worldwide.

Important NOTE:
Due to the anticipated size of the item, additional shipping costs may apply. These costs will depend on the shipping address, product dimensions and product weight. These details are not yet known and may only be determined once the goods arrive at our warehouse.

From the popular anime series "Kaguya-sama: Love is War" comes a Nendoroid of Miyuki Shirogane, student council president of Shuchiin Academy!

He comes with three face plates including his serious expression reminiscent of the show's key visual, a cuter smiling expression and a "That's it!" expression! Optional parts include his smartphone and a pair of the cat ears that looked so good on him they drove Kaguya crazy!

The inner cardboard sheet of the packaging functions as a background sheet of the student council room that can be displayed with the background sheet included with Nendoroid Kaguya Shinomiya to create an even larger scene of the student council room!

Be sure to add him to your collection along with Nendoroid Kaguya Shinomiya scheduled to release in July and Nendoroid Chika Fujiwara set to go up for preorder at a later date!

From the popular anime series "Guilty Crown" comes a 1/7 scale figure of the songstress Inori Yuzuriha! The figure is based on the memorable scene of Inori with her arms stretched out holding the Cat's Cradle. Her long, cherry blossom-colored hair flows softly in the breeze, emphasizing her dainty looks. Her soft expression exudes an air of fragility, perfectly balancing the mystique of a songstress with the delicateness of a young girl. Her goldfish outfit features a gradated color scheme going from crimson to orange, highlighting the three-dimensional shadows. The airy frills are sculpted to appear like swaying fins underwater, giving the figure a sense of motion even while still. The base of the figure is inspired by the Void Effect from the series, and the silver frame and parts intertwine to create an impressive display reminiscent of the final scene of the series. Be sure to add this special figure to your collection!

The genius tsundere heroine has arrived! From Steins;Gate, the next-generation adventure game developed by MAGES. and Nitroplus, the heroine Kurisu Makise joins the lineup! By the early age of 18, this tsundere genius had already skipped grades to graduate from college and was working as a neuroscience researcher at Viktor Chondria University. She is brought to life based on the illustration from the exclusive version of the Xbox 360 game package. Defying gravity, a unique feeling of suspension surrounds this figure as she sits atop a series of intertwined gears that make up her base, looking out into the distance. Careful attention was paid to ensure that this piece faithfully recreated the whimsical atmosphere of the original series. In addition to her beautiful looks, the sculpt of her casually worn jacket and necktie, boots, and broken cell phone have all been brought to life in painstaking detail.

*This reproduction will have a different SRP than its first release.

Product Size: 24 cm

Introducing Flame Straile from the XenoAlma Series — A weapon series that expands the lore and customizability of the Arcanadea series. The parts can be reassembled to create two forms: Monster form, which can be fully built with this kit alone, and the weaponry form for the character Lumitea. Flame Straile can also be combined with Blaze Ophis to create the giant XenoAlma, Explode Volcalion. Each part is connected via 3mm joints, allowing them to be used not only with Arcanadea characters but with all original Kotobukiya series models. Included Items & Features: - Parts can be reassembled to create two forms: Monster form, which can be fully built with this kit alone, and the weaponry form for the character Lumitea. - Flame Straile can be combined with Blaze Ophis to create the large XenoAlma, Explode Volcalion. - Flame Straile can be combined with Blaze Ophis to create a large back unit, Explode Wing. - Each part is articulated, allowing for a variety of poses in Monster form. - The 3mm connection points on each part make them customizable and compatible with existing M.S.G, Frame Arms, Frame Arms Girl, HEXA GEAR, SOUSAISHOJOTEIEN, and MEGALOMARIA parts. - The kit includes the standard Arcanadea base. Use the base to display Flame Straile floating in the air. Weaponry Mode: - Shoulder Armor: Includes armor for both shoulders. 3mm joint connection allows connection with other Kotobukiya kits. The front and back cover parts also have 3mm connections, and can be detached or expanded. - Back Unit: The base, left, and right units are connected by 3mm joints, allowing for flexible movement. The flame effect parts also have 3mm connections, and can be detached or expanded. The effect part in the center of the back unit is articulated and feature a ball joint that allows for flexible movement. - Swords: Two curved swords can be created by adding parts to a part of the back unit.

*Some products may not be compatible due to shape restrictions.
Product Size: 10 cm

"From Kotobukiya's ""Sci-Fi Fantasy x Bishoujo"" plastic model series, ARCANADEA, the dragon-form Dears, Gii, joins the lineup!

The model is based on an original illustration by necömi, a popular illustrator known for her video game and VTuber character designs.
By changing out certain parts, the model can be assembled in ""Normal Mode"" or ""Wilize Mode"" when in combat.
The model is equipped with several 3mm joints, making it compatible with parts from other Kotobukiya original series.

Included Items and Features:

- The model can be assembled in ""Normal Mode"" or ""Wilize Mode"" by changing out certain parts.
- The kit includes five tampographed faces (Normal, Smiling, Starry Eyed, Crying, Angry). The angry face comes with two mouth parts that can be switched out to have a 3mm connection point.
- The kit includes left and right bent sleeve parts.
- The kit includes breath effect parts.
- The kit includes arm effect parts.
- The kit includes five interchangeable hair tuft parts.
- Decals are included to help users create their preferred expressions.
- The ears are interchangeable with the ears of other Dears.
- The kit includes neck parts for attaching heads from the Frame Arms Girl and Megami Device series.
- The kit includes a dedicated stand.
- The kit includes five sets of newly sculpted hand parts.

Normal Mode:

- The kit includes five different ahoge parts that are all articulated at the base and can move from side to side.
- The hair on either side of her face are articulated at the base, preventing interference when posing.
- The mouth of the angry face can be switched out for one with a 3mm connection point.
- The hip joints feature a new design that is more compact and allows for more movement than previous models with fewer parts.
- The tail is comprised of multiple connections and ball joints, allowing for highly flexible and expressive movement.
- The ball joints in the wrist allow the long sleeve parts to move up and down and from side to side.
- The 3mm connection points in the sleeves allow the frills to be freely removed and replaced with different parts.
- The kit includes alternate sleeve parts designed for deeper bends, prioritizing appearance over articulation.
- The magic circle base uses a pivot mechanism that prevents interference when posing.

Wilize Mode:

- The twin-tails are articulated at the base.
- The hem of her robe is articulated with ball joints, making it possible to prevent interference when posing.
- The main wing parts feature three points of articulation that allow for movement up to 95 degrees. The tips of the sub wings are also articulated.
- The bases of the wings are articulated, allowing them to open out wide.
- Each wing can also turn into massive claws by combining the points of articulation.
- The arms supporting the large wings are designed with stable 5mm connection joints. The various points of articulation allow the wings to spread and be posed in any direction.
- The flame arm effect parts feature articulation at the elbows. The hand flame parts are split into three sections with ball joints at the base that allow them to individually spread out.
- The large hand parts are connected with ball joints for expressive posing."

“Hey, won't you engage with me? Like, Master and I are totally a perfect match, right?”

From Kotobukiya's sci-fi fantasy plastic model kit series, ARCANADEA, the twin Dears with a devilish form, Banil, joins the lineup!

The character design is by the highly anticipated and popular illustrator, Nidy-2D-!
Under the supervision of Nidy-2D-, the model has been brought to life with meticulous attention to detail, down to the color scheme and face design.

By changing out certain parts, the model can be assembled in Normal Mode or Wilize Mode for combat.
The model is equipped with several 3mm joints, making it compatible with parts from other Kotobukiya original series.
Featuring a large XenoAlma under her control, this kit is one of the largest in the series!

Included Items and Features:
- The model can be assembled in Normal Mode or in the combat-ready Wilize Mode by changing out certain parts.
- The kit includes four types of face parts that have been pre-printed with tampography.
- Decals are included for users to create their preferred expressions.
- The kit includes neck parts for attaching heads from the Frame Arms Girl and Megami Device series.
- A special stand is included.
- The kit includes 11 sets of PVC hand parts for the left and right sides.
- Magic circle optional parts to connect to the back unit are included.
- A large (dog-type) XenoAlma is included.

Normal Mode:
- A movable joint on the back part of the hair allows for various expressions while avoiding interference when posing.
- The parts are separated along the details of each part of the fabric so the seams are not visible.
- A double-joint structure in the elbows allows for a wide range of articulation while preserving the thick sleeve silhouette.
- The scarf and skirt can be removed.
- For the arms, the upper arm rings and sleeves each feature joint articulation. The direction of movement can be adjusted by rotating the joint at the base.
- A new design is utilized for the hip joints. In addition to the slide articulation of the hip joint, the implementation of front-to-back articulation allows for maximum extension. Furthermore, a wider range of articulation is achieved by pulling out the ball receiver on the thigh side.
- The front skirt is articulated to avoid hindering leg movement.
- The knees use pop-out joints for articulation.

Wilize Mode:
- In addition to the articulation of various joints on the large left arm, each finger on the hand is poseable.
- By reconfiguring some parts, it can also be assembled as a right arm.
- The wings on the back can be posed via ball connections.
- Each part uses universal joints, allowing for free customization.
- By combining with Enil, large arms can be connected to both sides.
- The combined form can be freely reconfigured and customized.

XenoAlma:
- Free posing is possible through the articulation of various joints.
- Transforms and connects to the back as the left arm unit in Wilize Mode.
- The tail can be wielded as a weapon by equipping it the wrist of the main body.
- The mouth can open and close, making it possible to hold the tail sword in the mouth.
- The hard points on each part can be used to freely customize the model.
- Can be combined with the XenoAlma included with Enil to change into a Cerberus form.
Product Size: 19 cm

Introducing Orage Pavorea from the XenoAlma Series — A weapon series that expands the lore and customizability of the Arcanadea series.

The parts can be reassembled to create two forms: Monster Mode, which can be fully built with this kit alone, and Weapon Mode that serves as armaments for Dears.
Based on the design by illustrator Toshiaki Takayama, who designs for a wide range of media including games, cards, and books, the model is recreated with sharp contours and form.
The wings use semi-transparent clear blue for a luminous finish, and the tail feathers use an iridescent color inspired by a peacock.
In addition to a large bow, the weapons can be recreated in various forms such as a staff or a folding fan.
In addition to fantasy-themed weapon and armor parts, universal joints are included, allowing them to be used not only with Arcanadea characters but with all original Kotobukiya series models.

Included Items & Features:
- Parts can be reassembled to create two forms: Monster Mode, which can be fully built with this kit alone, and Weapon Mode that serves as armaments for Dears.
- The articulation in the wings, legs, and other parts allow for movement and dynamic posing in Monster Mode.
- The 3mm connectors on each part allow for standalone customization and compatibility with existing series such as M.S.G, Frame Arms, Frame Arms Girl, Hexa Gear, Sousai Shojo Teien, and Megalomaria.
- Four wings come in semi-transparent clear blue to recreate a luminous effect.
- The tail feathers are inspired by a peacock and use an iridescent color that change based on the angle.
- Includes the standard Arcanadea base. Using the base, Orage Pavorea can be displayed floating in the air.

Weapon Mode:
- Bow: The grip is articulated and the 3mm connection joints allow for customization. The bow can be made into an X shape with adjustments.
- Shoulder Armor: The connection points can move and allow for various poses. It can be connected to 3mm joints on various Kotobukiya model kits.
- Back Unit: Each part can be posed freely. Can be customized using the various joints on the unit.
- Waist Unit: The tail feathers can be expanded with the articulated joints.
- Universal Joints: A set of universal 3mm connection joints is included to further expand customization options, and can be used with a wide variety of kits.
- Staff Form: The staff form can be recreated by rearranging the parts.
- Folding Fan Form: The folding fan form can be recreated by attaching a grip to the tail feathers on the back unit.
*Note that some models are not applicable due to their different structures.

Product Size: 10 cm

“U-Umm! If you’re fine with Yukumo, may we engage?”

The updated version of Yukumo, the Dears with an animal-like form from Arcanadea, is released as an entry-level model!

This kit is easier to build compared to the standard version, making it a perfect match for users of all levels!
The included expression parts are the anime version and offer a different look compared to the original.

Included Items & Features:
- The separation of parts are updated, improving the kit’s ease of assembly.
- Includes two pre-printed face parts.
- The eye design on the two face parts are updated based on illustrations from the anime.
- A special stand is included.
- Wilize Mode can be recreated by swapping out the arm and leg parts from the standard version of the Yukumo model kit.
- The elbow joints have been updated to a double-jointed construction allowing for more posing possibilities.
- The knee joints feature a newly designed construction for a more natural appearance when bent.
- The shin parts have been separated along the front and back instead of the sides. When seen from the front, the separation line is hidden, improving its visual appeal.
- Her tail and the shimenawa on her back are changed to the anime design.
- The separation of parts for the shimenawa are updated and feature more points of articulation for more freedom when posing.
- Includes 5 sets of PVC hand parts.
- Her signature staff is included. Each of the ring parts on her staff are articulated.

What is First Engage Ver.?
First Engage Ver. updates the standard version and is redesigned with visual appeal and ease of assembly in mind.
The kit is simplified to contain only Normal Mode, making it the perfect entry-level model kit for anyone to pick up and enjoy.

Product Size: 15 cm

Affordable, Collectible, and FUN! Introducing Oshi Works, a new series from Kotobukiya! Based on "oshi", the Japanese word for favorite, Oshi Works is all about bringing your beloved characters to life at affordable prices. Whether you're just starting your figure collection or you're a seasoned collector looking for something more casual, Oshi Works suits all kinds of “oshi” fans. Each figure comes on a standardized square base that makes it easy to collect and display, so they can be shown from every angle. Of course, Kotobukiya will never compromise on our legendary quality and crisp paintwork, even while maintaining wallet-friendly prices. Display your Oshi Works figures alongside your other merch or start a brand-new collection with Kotobukiya's new series! Affordable, Collectible, and FUN! Jinshi from the YV anime The Apothecary Diaries joins the Oshi Works series! Oshi Works figures feature the satisfying volume expected from scale figures alongside paint finishes that bring out the characters' charms to the fullest. The result is a figure with an overwhelming presence that can be displayed anywhere. With his intricate decorations and elegant form meticulously reproduced, his presence is truly exceptional. Jinshi, sporting a cool smile, will add a touch of elegant sophistication to your collection. Display him with Maomao from the same series to enjoy the world of The Apothecary Diaries! Magnets secure the figures in place, allowing their positions to be adjusted to fit any collection case. Multiple bases can be connected to display figures from the same series side-by-side, adding even more fun to your collection. This is a must-have series for fans, satisfying both the fun of displaying and the joy of collecting.

Included Items:
- Figure (Partially Assembled)
- Dedicated Base (The figure connects to the printed iron plate using magnets.)